Hearthstone Wild Decks

List of contents of this article:

• 1, How to install the home security monitoring system?
• 2, What is the most basic equipment required to install the monitoring system? Is it okay not to monitor the host?
• 3, Installation steps of wireless camera monitoring system
• 4, Installation of wireless computer room monitoring system (necessity to improve the security of the computer room)
• 5, Network Digital Monitoring System Installation Guide
• 6、How to install the monitoring system

How to install the home security monitoring system?

Determine the installation location: Choose the appropriate installation location according to the characteristics and needs of your home. Generally speaking, doors, stairways, backyards and other places where safety problems are prone to occur are relatively common installation locations. Buy a suitable surveillance camera: choose a surveillance camera suitable for home use.

The installation process of home surveillance cameras is: select surveillance equipment, install cameras, connect hard disk recorders, and configure network connections. Select monitoring equipment. When selecting monitoring equipment, the number and type of surveillance cameras, the storage capacity of the hard disk recorder, etc. should be determined according to actual needs.

Choose a suitable camera: Choose a camera suitable for home use according to your needs, such as indoor cameras or outdoor cameras. Install the camera bracket: According to the use position of the camera, select the appropriate bracket, such as wall bracket or boom bracket, etc., and install the bracket in a fixed position.

You can follow the following steps to install home surveillance: confirm where the camera should be installed, determine whether to install it in the living room or in the shop, or determine the suitable installation position and installation angle of the camera. Keep the power socket and confirm the installation position before you can reserve the power socket.

What is the most basic equipment required to install the monitoring system? Is it okay not to monitor the host?

1. You can't do without monitoring the host. At present, the main monitoring used is divided into analog monitoring and network monitoring, so the basic equipment required is scored in two situations.

2. Monitoring installation requires high-definition cameras, monitors, routers, video recorders, power cords, network cables, camera brackets and other accessories. There are many types of cameras, each of which is divided indoors and outdoors. Under the same circumstances, the indoors are more clear than outdoors.

3. Take the network digital monitoring system as an example, the installation of monitoring equipment requires cameras, video recorders, monitors or monitors, switches, routers, network cables, power cords, crystal heads, camera brackets and camera power supplies, etc.

Installation steps of wireless camera monitoring system

1. After installing the camera in a good viewing position, it needs to be connected to the computer system. At this time, the computer should be turned on and installed The driver system of the camera, if the wireless camera you bought is driver-free, then omit this step.

2. First of all, a set of wireless surveillance camera equipment. Now wireless surveillance cameras are a whole, unlike in the past, you need to install lenses and infrared lamps by yourself.Connect the wireless network surveillance camera to the computer. After turning on the computer, install the driver of the wireless camera. Some of them are driver-free, which is better.

3. Installation method of wireless surveillance camera Installation auxiliary tools: a wireless router (must be a wireless router with an antenna), a network cable with crystal heads at both ends, and a smartphone. The connection of the device depends on the different equipment used in the system.

Installation of wireless computer room monitoring system (necessity to improve the security of computer room)

In addition, for some industries that need to strictly abide by safety regulations, such as finance, medical care, etc., the installation of computer room monitoring The control system is necessary. Because in these industriesA large amount of sensitive data is usually stored in the computer room, which may cause immeasurable losses once a security problem occurs.

Generally speaking, it is necessary to install a camera to connect to the existing monitoring system.

Therefore, from the perspective of computer room management, it is necessary to have historical information on the operation of computer room equipment, so that we can find out the development trend and potential faults through analysis. So as to greatly improve the management level of the computer room.

Network Digital Monitoring System Installation Guide

Take the network digital monitoring system as an example, the installation of monitoring equipment requires cameras, video recorders, monitors or monitors, switches, routers, network cables, power cords, crystals Head, camera bracket and camera power supply, etc.

Buy spare parts and host, check whether the equipment is complete, bridge host, POE power adapter, metal steel ring, and bracket for installing the holding rod. Here, the triangle bracket or elevation bracket can be optional.

The method of installing the mobile phone monitoring system on the mobile phone is as follows: according to the different access terminals, the ordinary network digital monitoring system is divided into two modes: hard disk recorder NVR and computer connection monitoring. The IP address of the network camera and other parameters can be connected according to the computer mode. Use the browser to enter the default IP of the device to access and set the parameters.

Before arranging the camera, you should choose the installation position of the camera and choose the right camera according to your own needs. Install the camera in the right position, turn on the camera power, and connect to the network on the camera "Settings" interface.You can also insert a memory card into the camera to record relevant surveillance videos.

How to install the monitoring system

The monitoring installation scheme of different scenarios is different, and the following 3 scenarios are more common: factory monitoring installation: intelligent alert camera with intelligent brain series NVR, alarm information visualization, image fast return Check. Construction site monitoring and installation: entrance and exit control, monitoring products, comprehensive supervision and prevention.

The installation steps of the home security monitoring system are as follows: Set the monitoring area: First, determine the area that needs to be monitored in the home, such as the front door, back door, garden, etc. Choose the appropriate number and location of monitors according to your needs. Install the monitor: Fix the monitor in the right position, such as the wall or ceiling.

Take the network digital monitoring system as an example, the installation of monitoring equipment requires cameras, video recorders, monitors or monitors, switches, routers, network cables, power cables, crystal heads, camera brackets and camera power supplies, etc.

After completing the bridge at the central end, use the same method to connect the network cable of the other end of the bridge to the connection of the network camera. After all the equipment is installed, the equipment is powered on and the parameters of the hard disk recorder are set, including modifying the points of the monitoring screen, setting the recording time, alarm time, etc.